The stage lighting handles the main points

The stage lighting handles the main points

toastmasters

Compared with the stage lighting, lighting requirements unique stage of toastmasters, characters and the audience visual light regulation, and atmosphere of rendering stage lighting is stage characters and the audience visual impact. The light intensity, range, location, etc. Are different.

The light in the vicinity of the stage is bright, but be careful not to make the speaker feel the light.

The lights in the audience room remain in general brightness.

Turn on some lights and ceiling lights.

When the spotlight is needed to make a projection, the lights in the auditorium are dimmed, and the speaker is illuminated by the spotlight, in order to make it easier for the audience to see the screen.

There are various kinds of ritual ceremonies, including awards, celebrations, congratulations, wedding celebrations and so on. There is a host and a major person on the stage, no matter which ceremony, if there is a show and the host. The figure on the stage is the focal point of the light projection, the lighting is handled as follows:

1, turn on all lights and ceiling lights, as well as the upper surface lights.

The lights in the vicinity of the rostrum are bright so that the audience can see the faces and expressions of the people on the stage.

When the lighting effect is required in the ceremony, according to the requirements of the sponsor, the ceremony will be used for lighting or lighting.

When presenting, performing or performing arts and arts in a ceremony, the lighting should be considered separately. The stage lights vary according to the circumstances of the performance, rendering a visual psychological transmission.

Third, concerts concerts, music players, according to the arrangement of the band sitting on the stage of lands, open stage light, stage before the part above the lamp, ceiling lamp, the audience lights to dim. Note the following points:

The band must be able to see the players and the instruments as they play.

Enable the band member to read the score.

When there is a chorus, the face of all the choral players should be seen clearly by the audience.

When the commander is in command, the audience must be seen clearly.

When there is a solo, there is a need to be bright near the soloist, but be careful not to move your eyes when you are casting light.

The audience should maintain a certain level of brightness, which will enable the audience to see the programme.

There are many kinds of drama plays, which can be divided into two kinds: traditional and modern, the traditional costume and costume, and the modern drama has realistic and expressionless style. In the light processing, we should adopt different methods of processing according to different kinds of play and style, and the large plays are designed in the performance, even the small plays must understand the plot and the intention of the performance. Tell commonly classical audiences.masks suit and white or pale light, not much attention to environment and scene description, as well as the psychological and emotional expression, so pay attention to the light distribution and match colors, strive to truly show artistic conception. Some modern plays often require the expression of fantasy, dream, or abstract expression of the work. In addition to deepening understanding of these works, we should pay attention to innovation in the light processing, and cooperate with the stage equipment to achieve the desired effect.

Five, opera opera light processing, with the same theater, is only part of music to a good understanding, opera music work, content and style of the music if you don't know, it's hard to light processing. It is best to learn the music of the opera before the show, and the performance is changed by music, which must be performed in the rehearsals.

Six, folk songs and dances, folk song and dance show, give priority to with song, add another dance, lamplight processing mainly focuses on the singer's lands, and lands of the dancer's general singer to play in front of the platform or left standing in the middle, the dancer more than standing in the middle of the stage, these lands light processing, must make the audience can clearly see that the movement and the expression of performers. The folk song and dance scene basically USES white light, the dance wants to be based on the director's intention, use various color light, in order to achieve rich and colorful lamplight effect. How the singing and dancing can be used in the rotation of the light, before the performance is discussed and rehearsed.

The folk song and dance of the national song and dance has a strong national color, not only in the content and form of the performance, but also in the dress and decoration of the national characteristics. These features need to be reflected in the light. Are generally light processing according to the content and intention of the director, because national costumes colorful bright magnificent, basically use white light, the lamps and lanterns hanging lamp mainly used and the spotlight in the spotlight, and floor lamp, stage effects and etc. The most important thing is to make the audience see the gestures and expressions of the performers, and make the costumes, decorations and scenery beautiful and colorful. If you want to avoid the original color in the light treatment, you can also use a light color filter.

Western singing and dancing western music and dance range are wide and varied, with the exception of large orchestra playing, chorus and singing, and chamber music playing, guitar, piano and so on. The most popular musical shows now are rock music, pop songs and so on. The singer dances and dances with intense passion and freedom, dancing and dancing, and dancing with modern instruments. The light processing should be based on the requirement of the show and the actor, and generally use rich color. Be aware of the composition of dance and the melody of the dance, and the color of the costume, because it must depend on the light effect to succeed.

Quyi, xiangsheng and clippers, etc., are basically used in white light, according to the requirements of the variety of the quyi and the performers. The use of hanging lamps is commonly used, and the lighting can be used to move the performers around the stage, so that the audience can see the actors' movements and expressions.

Poetry recitals stand in front of the stage, reading new poems or poems in a passionate voice. Reciting ancient poems is best used in white light, but also in light color. It is better to be familiar with the content and artistic conception of the poem, use the color light to describe the situation, and also use the effectors or slides according to the requirements of the performance. Some reading program in the reciter behind and dance, dance performance content and the artistic conception of the poem, the dancer lamplight processing according to dance show, in the process of poetry readings, intent on light and shade change according to the performance. The reading program USES the suspension lamp, the floodlight, etc., to make the light effect which is suitable for the content of the poem.

Number 11, performance of performance, such as musical performance, vocal performance, comedy show, swing dance performances, clothing models, etc., in addition to acrobatics, magic, such as paper cutting, painting, qigong performance. Each of these programs is characterized by light processing based on the form and content of the performance. Each program should be based on the intention of the performance and be innovative, and the content of the program should be understood and rehearsed repeatedly before the performance.

The musical performance is more complex, with both the music playing and dramatic performance, with special requirements for lighting. First, familiarize yourself with the intention of the script and the director, make full use of the function of the light, and create the atmosphere with colorful and colorful light. It is best to use a special effector, or use a light beam spot light, and use a multi-desk lamp to track the light.

Singers also use musicals and lighting. Karaoke singers, for example, sing along with the lyrics and the mood of the singer's performance, and the different colors of light are constantly changing, making the mood and mood more intense.

In addition to using the color light, the swing dance is also used in the light of impulse, such as using a pearl lamp or other beams of light, to make it shine brightly. If you are using the light method of the avant-garde, use a silicon variable light or smoke laser to project, but there is a certain danger in the lighting operation. Therefore, it is necessary to prepare carefully before the performance and take safety measures.

The main purpose of the costume model performance is to look at the costumes, so the models to wear are white light, preferably with a thin beam of light. During the performance, according to the performance and the performance requirement, the performance of the model and the mood and the atmosphere constantly change the light, in order to achieve the expected lighting effect.

For the performance of music, cross talk, play, etc., white light is generally used, and it is easier to deal with lighting. This kind of program is best not to use stage ground lamp, lest influence acting or occurrence accident, the lamp of the audience is bright or dark, want to adjust according to the content of the program.

Performing light rarely transformation in practice, such as light and shade, color, light is basically is a kind of style, the compared with the singing of stage lights seems regulatory less, but did not reduce, because it is in the same situation to the whole music fuses, must make the corresponding predictable and sensitive part of the subject.

Twelve, amateur or students play the game in theater or in an auditorium, amateur dramatics, or sometimes held students play the game, the race has a lot of group, have different game play, and the judges has certain requirements. To participate in the competition before the competition, to give up the performance table, the requirements of season, time, climate and environment are put forward for simple lighting design. Because it is a race, you need to be treated equally and not be able to discriminate on the effect of the light. Before the performance, you need to discuss with each group to get the approval of the groups. Attend the game play different scenarios, the lights have different requirements, but play replacement time is limited, so it's best to fix the background, use the front of the stage stage front lamp, hanging lamp, floor lamp, in order to timely change of color filter. It is not commonly used in the use of overhead light and overhead light, because this kind of lamp will need people and time when changing color.